Shantui LE60 wheel loader
Gräfelfing
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 89 380...
+49 89 38031644
Germany, Borken (Hessen)
Germany, Borken (Hessen)
Germany, Borken (Hessen)
Germany, Grossenaspe
Germany, Grossenaspe
Germany, Eschweiler
Germany, Eschweiler
2,500 kg
Dumping height
3.04 m
Germany, Buxheim
Germany, Hohenthann
Germany, Schneverdingen
Germany, 27793 Wildeshausen
1,850 kg
Dumping height
2.9 m
Germany, Kastl
Germany, Oerel
Germany, Grossenaspe
Germany, Grossenaspe
Germany, Grossenaspe
Germany, Grossenaspe
The SHANTUI LE60 is a used
fully electric wheel loader suitable for heavy construction tasks
with a robust operational weight of 20 tons. It is powered by a 357 kWh lithium-ion battery
featuring liquid cooling and rated at 537.6 V / 664 Ah. This allows for up to 6–10 hours of usage
with a charge time from 20% to 95% taking approximately 1.25 hours when using a 240 kW charger
Equipped with a 100 kW driving motor capable of a maximum of 200 kW and an 80 kW working motor that peaks at 160 kW
this loader offers impressive torque for demanding tasks. The transmission is an electronically controlled gear system
supported by self-locking differential axles. With a maximum speed of 38 km/h
it efficiently handles operational demands
boasting a lift capacity of 6,000 kg. The hydraulics system delivers a flow rate of 112 l/min
ensuring fast and reliable performance with full cycle times totaling 9.5 seconds
For maneuverability
it features dimensions of 8,930 mm in length
3,030 mm in width
and 3,440 mm in height
with a wheelbase of 3,400 mm. The minimized turning radius enhances maneuverability in tight spaces. Safety and efficiency are further ensured with its fully hydraulic service brake and drum-type parking brake system. This makes the SHANTUI LE60 a practical and power-efficient choice for high-volume load and carry applications
Technische Daten
Batterie & Antrieb
Batteriekapazität 357 kWh Akkutyp Lithium-Ionen
IP68
flüssigkeitsgekühlt Nennspannung / -kapazität 537,6 V / 664 Ah Ladezeit 20–95 % ca. 1,25 Std. (bei 240 kW) Empf. Ladesäulenleistung 120 / 240 / 300 kW Akkulaufzeit 6–10 Std
E-Motoren
Fahrmotor 100 kW (max. 200 kW)
1 200–2 400 Nm
IP67 Arbeitsmotor 80 kW (max. 160 kW)
400–800 Nm
IP67 Getriebe Elektronisch gesteuertes Festwellengetriebe
F2/R2 Achsen Selbstsperrdifferential
Übersetzung 20,86
Reifen 23.5-25-20PR Geschwindigkeit 13,5 / 38 km/h (Gang 1/2)
Leistung & Hydraulik
Nenntragfähigkeit 6 000 kg Max. Losbrechkraft 185 kN Max. Zugkraft 160 kN Hydraulik – Fördermenge 112 l/min (Doppelpumpen-Zusammenführung) Zykluszeiten ≤ 5,5 s / ≤ 1,0 s / ≤ 3,0 s (Gesamt ≤ 9,5 s) Bremssystem Vollhydraulische Betriebsbremse
Feststellbremse Trommel
Abmessungen
Länge × Breite × Höhe 8 930 × 3 030 × 3 440 mm Radstand / Spurweite 3 400 mm / 2 250 mm Min. Bodenfreiheit 440 mm Wenderadius (Reifenmitte) 6 535 mm Durchgangsradius 7 640 mm Lenkwinkel / Böschungswinkel 35° / 27°