New Małek Agregaty M-4 MAX 400V plastering machine
≈ US$5,537
Węgrzce
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 883 08...
Show
+48 883 088 443
+48 603 08...
Show
+48 603 088 447
+48 502 40...
Show
+48 502 402 937
Poland 
Poland, Bytonia
Poland, Bytonia
Poland, Przemęczanki
Poland, Przemęczanki
Poland, Przemęczanki
Poland, Przemęczanki
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Węgrzce
Poland, Belchatów
Poland, Radziemice
Poland, Radziemice
Poland, Radziemice
Poland, Radziemice
Poland, Radziemice
Poland, Radziemice
show contacts
The M-4 MAX 400V plastering aggregate is a top-class device that meets rigorous standards and has a European Certificate. The machine will meet the expectations of even the most demanding customers operating in the construction industry. Reliability and refinement in every detail are the characteristics of the plastering unit.
If you are looking for a machine that will serve you for years, choose our offer! We are a Polish manufacturer, making machines we rely on the experience gained, both professional and technical. Our equipment is a response to the needs of the constantly developing construction industry. Without appropriate equipment, it is impossible to provide services at a high level, let alone compete with the competition. M-4 MAX 400V plastering aggregates are devices that you must have in your company. You can read about the specifics of the product, purpose and benefits below.
The M-4 MAX 400V plastering unit is used for mechanical application of plaster and mortars with a maximum grain size of 3 mm:
gypsum plaster
gypsum and lime plaster
cement
lime plaster
lime-cement plaster
mortar
damping plaster
joint mortar
reinforcement and adhesive mortar
machine spouts
adhesives, lime coats
anhydrite screeds
other
The aggregate tank can be filled with either bagged material or through the flow or blow cap.
Plastering aggregate M-4 MAX 400V technical specification:
gear motor of the feeder NORD 0.83kW S3-70% 29 rpm M-4 MAX 400V
gear motor NORD 6.05 kW 415 rpm feed pump M-4 MAX 400V
water pump PK65 380 - 400V 1.7A 0.5kW
pump unit D6–3 stator + rotor,
0.9kW air compressor 250 l / min, pressure 5.5 bar,
cleaning unit - shaft and cleaner,
socket wrench for screwing in the rotor,
cleaning ball of the working hose fi30,
water meter 150 - 1500 l / h,
working hose DN25 10 m with camlock couplings,
3/4 "water hose, 25 m, pressure gek fitting and gek fitting with a stub pipe,
3/8 ”reinforced air hose 12.5 m fittings 2 x geka with a connector
5x 2.5 mm2 20 m power cord with a 5B PCE 32A plug,
75 cm spray lance with a Ø 12 nozzle
gun scraper,
a key to unscrew the water reducer glass,
mixer M-4 Max
yoke pump DN25 male cam lock type D
spray gun for producing water mist
Additional equipment of the aggregate
working pressure timer with a plaster separator 60 bar DN25
cover for a plastering unit
measurement probe 42V
various types of nozzles for the gun: pink, black, black conical and various sizes fi: 8,10,12,14,16,18
a tube for a lance of various lengths: 25 cm, 75 cm, 100 cm, 125 cm, 150 cm
yoke of the pump for DN35 type D faucets
yoke pump for faucets DN35 type R
pump yoke DN25 male cam lock type R
35 mm hose for spouts
clock of working pressure with a separator for spouts 60 bar DN35
rotomix type D DN35 / 25
rotomix type R DN35 / 25
tarpaulin - cover for a plastering unit
control button with a cable of various lengths: 12 m, 20 m, 30 m
extension for the M-4 aggregate, the original Malek 96 liters
Main components of the generator
The subassemblies that can be removed from the unit if necessary (including transport) are:
compressor
water pump
mixing chamber with a mixing pump
near the feeder
feeder wheel cover
charging grate
The weight of the aggregate with all major components is 270 kg.
What distinguishes the M-4 MAX plastering unit from other aggregates? Discover the greatest advantages of the device:
The M-4 MAX 400V plastering unit is equipped with a water pump switch. It is possible to switch to the AUTO operating mode, both with low pressure and no water pressure.
built-in phase loss sensor, as well as the direction of rotation of the motor.
M-4 MAX 400V plastering aggregates have the function of reversing the mixture - at reverse speed, which is especially important in the event of a blockage of the mixture.
one of the accessories is the PEDROLLO 400 V 500W water pump (it can be disassembled).
the assembly of the electric box was made on Eaton components, and the mounted power sockets are made by PCE.
The M-4 MAX 400V plastering unit is equipped with two 230 V sockets, one of which is controlled to connect an optional pump, and the other can be used to connect, for example, a LED lamp
height of hopper 950mm
tank capacity about 150L
pumping pressure max 40bar
feeding distance max 40m
possibility of connecting a silomat
possibility of connecting the remote control controlling the aggregate
possibility of connecting the gun to plaster, facade and garage systems
We provide a 12-month warranty for the M-4 MAX plastering aggregate!
Why is it worth choosing M-4 MAX 400V plastering aggregates? These are new generation products that meet the highest standards. They provide comfortable and efficient work. By choosing aggregates, you gain the best ally, helping in the implementation of these larger and smaller works. The M-4 MAX 400V plastering unit ensures that nothing unforeseen will surprise you during your work. Taking care for the highest quality, we decided to certify the structure, providing solutions tailored to the needs.
Our offer also includes construction parts for aggregates and spare parts.