Normag ASV015/10-K-SP01 und SP02 other laboratory equipment
Grenzach-Wyhlen
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7624 98...
Show
+49 7624 9889756
+49 170 81...
Show
+49 170 8106758
Germany 
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Lörrach
Germany, Lörrach
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Laboratory equipment parts
Type: ASV015/10-K-SP01 and SP02
material: Borosilicate glass 3.3
* Contact pressure (Ps): 1.0 bar (±0.5 bar)
* Blow-off capacity (Qst allowed): 180 kg/h
* Construction: With spring mechanism and flange connection
* Purge capacity (Qst allowed): 180 kg/h
The Normag safety valve made of borosilicate glass 3.3 is a high-quality glass construction component for pressure relief in chemical or pharmaceutical plants. It has been specifically designed for use in glass reactor systems and is suitable for working areas with aggressive media as well as temperature fluctuations.
The system consists of the parts shown in the pictures.
Advantages:
- Corrosion resistant: Made of chemically resistant borosilicate glass 3.3
- Safety tested: spring-loaded safety valve with defined response pressure
- Compressive strength: Operating pressure 1 bar (±0.5 bar)
- High flow rate: Blow-off capacity up to 180 kg/h
- Process temperature: Operating temperature range from -50 °C to +200 °C
- Transparency: Visual inspection of medium & condition always possible
- Ready for installation: Including seals, mounting & spring mechanism
---------------------------------------------------------------
2. General functions
- Safety valve for pressure relief in glass reactor systems
- Transparent construction for visual process control
- Used as part of overpressure protection systems
- Compatible with standard flange systems in glass apparatus
- Feder-loaded backpressure relief for automatic opening at defined system pressure
- Process-safe & low maintenance
---------------------------------------------------------------
3. CO₂ savings
By reusing this glass component instead of buying a new one, not only energy is saved for production, but also resource consumption is reduced.
♻️ Estimated CO₂ savings: 120 – 180 kg CO₂
This corresponds to about the CO₂ emissions of a 500–700 km long car driving path or one Monthly electricity bill of a two-person household.
---------------------------------------------------------------
4. Device details (type plate data in German)
Manufacturer: Normag Laboratory and Process Technology GmbH
Type: ASV015/10-K-SP01 and SP02
Material: Borosilikatglas 3.3
Part numbers:
- 63371 (SP01)
- 63370 (SP02)
- Temperature range (Ts): -50 °C to +200 °C
- Set pressure (Ps): 1.0 bar (±0.5 bar)
- Bleed capacity (Qst permissible): 180 kg/h
- Condition: Used, very good condition, no cracks, no visible chips - visually and functionally flawless
- Construction: With spring mechanism and flange connection