Okuma MC 4 VA + MC 5 VA + MV-35/40 metal milling machine
Rotterdam
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 872...
Show
+31 6 87227638
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Netherlands, Rotterdam
Control unit: Okuma MC 4 VA and MC 4 VA= Okuma OSP 5000M - Mori Seiki= Fanuc M 11
Table length: Okuma MC 4 VA= 1000 mm - Okuma MC 5 VA= 1550 mm - Mori Seiki= 1100 mm
Table width: Okuma MC 4 VA= 510 mm - Okuma MC 5 VA= 650 mm - Mori Seiki= 350 mm
Table load: Okuma MC 4 VA= 500 kg - Okuma MC 5 VA= 1250 kg - Mori Seiki= 500 kg
Spindle taper: Okuma MC 4 VA= BT50 - Okuma MC 5 VA= BT50 - Mori Seiki= BT40
Spindle speed: Okuma MC 4 VA= 6000 rpm - Okuma MC 5 VA= 4000 rpm - Mori Seiki= 6000 rpm
Tool magazine: Okuma MC 4 VA= 20 positions - Okuma MC 5 VA= 20 positions - Mori Seiki= 20 positions
Availability: Immediately
net weight: Okuma MC 4 VA= 5700 kg - Okuma MC 5 VA= 9900 kg - Mori Seiki= 6400 kg
length: Okuma MC 4 VA= 2380 mm - Okuma MC 5 VA= 3500 mm - Mori Seiki= 3581 mm
height: Okuma MC 4 VA= 2710 mm - Okuma MC 5 VA= 3000 mm - Mori Seiki= 2946 mm
width: Okuma MC 4 VA= 2585 mm - Okuma MC 5 VA= 3400 mm - Mori Seiki= 2970 mm
X-axis travel: Okuma MC 4 VA= 650 mm - Okuma MC 5 VA= 1050 mm - Mori Seiki= 762 mm
Y-axis travel: Okuma MC 4 VA= 410 mm - Okuma MC 5 VA= 510 mm - Mori Seiki= 350 mm
Z-axis travel: Okuma MC 4 VA= 450 mm - Okuma MC 5 VA= 610 mm - Mori Seiki= 450 mm