Sandvik QJ341+ jaw crusher
Hosťovce
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
+421 950 84...
+421 950 841 364
Slovakia, Bernolákovo
Slovakia, X
Poland, Wolbrom
Poland, SOŚNICOWICE
Poland, Sochaczew
United Kingdom, Peterborough
China, Shanghai
Lithuania, Kužiai
Spain, CABRIANES - SALLENT
United Kingdom, Billingham
Poland, Chojnów
Poland, Choszczówka Stojecka
Crushing equipment parts
The machine is equipped with an independent double-deck pre-screen positioned before the crusher inlet, ensuring effective removal of fines. This results in higher machine performance, reduced wear of the crushing jaws and lower fuel consumption. Another advantage of this machine is the automatic material feed into the crusher, eliminating the need for operator intervention. The crusher closed side setting (CSS) is fully hydraulically adjustable via the control panel or remote control. The crusher can be started under full load or with a fully filled crushing chamber and features a reverse crushing function to release jammed or problematic material, such as asphalt.
Hopper
• capacity 9,5 m3
• hydraulically folding side walls
• reinforced rigid hardox sidewalls for heavy loads
• protective covers for the piston rods against damage
Vibrating feeder
• primary enlarged feeder for heavy loads
• fully automatic feeder speed control according to jaw crusher load - adjustable feeding speed also manually
• feeder length 2,285 mm
• abrasion-resistant design
Pre-Screen
• highly efficient two-surface screener
• step grate section on the upper surface
• 35mm sieve on the bottom surface
• high screening speed 960 rpm and amplitude 10mm
• inclination 9°
• by-pass chute with three positions (under crusher on main conveyor, on side conveyor, split)
Sandvik C12 single jaw crusher
• inlet opening 1200 x 750mm
• fully hydraulic slot adjustment via control panel or remote control
• standard slot adjustment 50-170 mm
• reversing of the crusher to release stuck material or problematic material such as asphalt
• start-up of the crusher at full load
• crushing plates rotatable 180°
• adjustable crusher speed
• new Danfoss crusher drive motor with improved clutch assembly
• crusher installed on anti-vibration pads to prevent vibrations entering the frame
• labyrinth seals with additional sealing to protect bearing seats from contamination and corrosion
• automatic lubrication of crusher bearings
Conveyor:
• width 1000 mm
• new system for sensing the conveyor's operation/speed (in the event of the conveyor stopping or slowing down, the material feeding will automatically stop)
• hydraulic folding to increase the space under the crusher
• equipped with impact bars under the crusher
• rubberized drums
• fitted wipers
• discharge height of the conveyor 3855 mm
• hydraulically folding upper part of the conveyor to reduce the transport length
• passive water folding
Side extended telescopic conveyor - hydraulically folding
• discharge height 3128mm
• fitted wipers
• rubberized drums
Power Unit
• CAT C9,3 Tier 5 engine
• 279kW (375hp) turbodiesel
• high power output ensures plenty of power for demanding operations
PLC control unit
• easy to operate by means of icons
• automatic start-up of the entire machine - adjustment of slot, feeder, etc.
• prevents incorrect machine start-up
• monitors operating data
• diagnostic table
Running belts
• link width 500 mm
• remote and wired drive control
Machine power and weight
• max. machine output 450 t/h
• weight approx. 53 t