Sidel SBO 20 Universal Combi filling line
Menslage
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany, Menslage
Germany, Menslage
Germany, Menslage
Germany, Burgwald-Ernsthausen
Germany, Menslage
Germany, Burgwald-Ernsthausen
Germany, Menslage
Germany, Menslage
Germany, Wentorf Bei Hamburg
Germany, Burgwald-Ernsthausen
Maximum filler speed: 30,000 bph
Application: blowing, filling and capping of PET bottles
Products: sparkling mineral water and flavoured sparkling mineral water with high CO2 content
Neck finish: 26/22 GME 30.40
Preforms processed: rPET Luxpet
Bottle formats: 1.0 l (82.5 mm diameter, 271 mm height) and 1.5 l (86 mm diameter, 326 mm height)
Overview
This SIDEL SBO 20 Universal Combi blows
fills and caps PET bottles in one integrated block. The system was manufactured in 2005 and started production in 2006. It is designed for sparkling mineral water and flavoured sparkling mineral water with high CO2 content in 1.0 l
1.25 l and 1.5 l PET bottles
A HEUFT Spectrum TX 180 fill-level and cap-presence inspector and a single-lane bottle conveyor complete the scope. The machines are still installed and under power and can be inspected by appointment
Technical data
Moulds are not included in the scope of supply
Scope of Delivery
PET Blow Moulder | SIDEL | SBO 20 UNIVERSAL | 20 mould stations
quick change for shell moulds | 2005
Oven | SIDEL | UNIVERSAL | Linear oven with Olicorp
24 heating modules | 2005
Blowing Wheel | SIDEL | For 20 moulds
PCC drive
Siemens CE electrical cabinet | 2005
Transfer Device | SIDEL | Between blow moulder and filler | 2005
Isobaric Filler | SIDEL Simonazzi | SELEC 515 FMG 120-15C | 120 filling valves
pitch 113 mm
max. 30,000 bph | 2005
Capper | Zalkin | HYSTERESIS H6 | 15 heads
quick change of the chucks
cap type 26/22 | 2005
Cap Feeder | SIDEL Gebo | For flap cap 28 and 26/22
tilting device to the capper chute
42,000 bph | 2005
Bottle Conveyor | Single-lane conveyor at the combi exit
length to be discussed
Fill Level and Cap Inspection | HEUFT | SPECTRUM TX 180 HBBVXTI60 | Fill level and cap presence control | 2006
Spare and Format Parts | All available spare parts and specific format parts included
Condition
Good working condition
still installed and under power. Preventive and corrective maintenance is carried out annually by the in-house maintenance team and
where required
by SIDEL. Driving panels and computer
the electrical and mechanical drawings
service and maintenance manuals and the spare parts books are part of the supply. The equipment is sold as it stands and is to be dismantled
Availability
In production until 27 November 2026. Dismantling is planned for week 49/2026
craning out and loading from the beginning of December 2026