Verified seller 
Traub TNK 36 metal lathe for sale by auction
Boxberg
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€9,000
≈ US$10,340
Germany, Rain Am Lech
€1,000
≈ US$1,149
Germany, Berlin (Spandau)
€45,000
≈ US$51,680
Germany, Rain
€1,000
≈ US$1,149
Germany, Halver
€1,000
≈ US$1,149
Germany, Berlin (Spandau)
€4,500
≈ US$5,168
Germany, Boxberg
€3,800
≈ US$4,364
Germany, Hilden
€4,500
≈ US$5,168
Germany, Weilheim Teck
€2,490
≈ US$2,860
Germany, Nagold
€200
≈ US$229.70
Germany, Giessen
€1,500
≈ US$1,723
Germany, Giessen
€1,200
≈ US$1,378
Germany, Lüdenscheid
€250
≈ US$287.10
Germany, Giessen
€9,900
≈ US$11,370
Germany, Nagold
€1,200
≈ US$1,378
Germany, St.ingbert
€800
≈ US$918.80
Germany, Giessen
Operating voltage: 460 V
Frequency: 50 Hz
Connection: 33 kW
Rated current: 56 A
Reading operating hours: 18,538
incl. the clamped tool holders and tools shown in the photos
Control: TRAUB SYSTEM TX 8i
Main spindle:
Rod passage: 36 mm
Max. speed: 6300 rpm
Drive power at 100/40% Working cycle: 6.7/10.7 kW
Torque at 100/40% Working cycle: 21/32 Nm
Tool turret top:
Number of tool stations: 12
X-axis travel: 50 mm
Y-axis travel (option): +-20mm
Z-axis travel: 100 mm
Rapid traverse X/Y/Z: 15/15/15 m/min
X/Y/Z measuring system resolution: 0.0005/0.001/0.001 mm
Input force X/Y/Z: 4240/4240/4240 N
Front unit:
Number of tool stations: 5
Diameter: 40 mm
Distance: 54 mm
X-axis travel: 370 mm
Z-axis travel: 250 mm
Rapid traverse X/Y: 30/30 m/min
Input force X/Z: 2800/2120 N
Measuring system resolution X/Z: 0.0005/0.001 mm
Rear unit:
Number of tool stations: 5
Diameter: 40 mm
Distance: 54 mm
Travel X-axis: 73 mm
Travel Y-axis: +-50 mm
Rapid traverse X/Y: 15/15 m/min
Input force X/Z: 4240/4240 N
Resolution of measuring system X/Z: 0.0005/0.001 mm
incl. the clamped tool holders shown in the photos, as well as a chip conveyor and a coolant system from the manufacturer Resy, as well as a bar feeder from the manufacturer FNB, type: TURBO 5-42
Reference: Veatec - Lot 14